Dekema Austromat 354 Press-i-Dent Porselen Fırını

Dekema Austromat 354 Press-i-Dent Porselen Fırını

AUSTROMAT 354 press-i-dent: 200 standard firing programs can be clearly displayed in the Program Manager and are available for individual adaptation. Additional programs are either archived in the integrated memory in sets of 200 programs each, or simply loaded from the DEKEMA DREAM database from the internet. At present, more than 60,000 firing programs are available from nearly every dental ceramics manufacturer. Additional memory expansion or simple data transfers are also possible through the USB interface. The unique user interface of the AUSTROMAT 354 press-i-dent can be operated using the large touchscreen as well as the integrated webtechnology on each PC or Mac in the network. A JAVA™ capable browser is all that is needed to contact the AUSTROMAT 354 press-i-dent through a freely adjustable IP address. By incorporating the furnace into the network environment, online diagnostics or updates are also possible. A backup and recovery function through the USB interface reliably protects against data loss. Of course, firing programs can be retrieved or read out through the USB interface. In addition, the program runs can be recorded on a USB stick or accessed via FTP online. The image viewer can also supply files via FTP or USB. These functions make it easy to connect to “digital dental laboratories.”

The high-resolution screen can graphically portray the firing process or show patient images. The menu-guided professional mode enables precise entry of the drying and cooling steps. When programming in standard mode, the user can access saved (integrated) cooling steps. The use of the automated press time function (familiar from the AUSTROMAT 3001 press-i-dent) minimizes the cooling time of the pressed ceramic in the furnace and offers increased reliability.

Both of the detailed and the comprehensive programming needs of dental technicians can be accommodated in classic mode. The absolutely unrestricted programming language from the legendary AUSTROMAT 3001and AUSTROMAT 3001 press-i-dent offers an up-to-date and comfortable way for inputting data. A QWERTZ keyboard on the large touch-sensitive screen can also be operated with a USB mouse. Firing and pressing cycles can be programmed in any sequence without any time limits. This absolutely unrestricted programming option enables the use of any and all firing and pressing techniques. For example, the vacuum can be released while maintaining a specific pressure, or different pressures can be used in a single procedure.

Professional Mode Range Interval Unit
Dry temperature (AUTODRY) 80 to 200 1 °C
Start temperature/ preheating temperature 100 to 700 1 °C
Drying time 00:00 to 99:59 00:01 min:s
Closed time 00:00 to 99:59 00:01 min:s
Preheating time 00:00 to 99:59 00:01 min:s
Vacuum level 0 to 100 10 %
Heat rate 2 to 99 or max. 1 °C/min
Final temperature/ firing temperature 100 to 1200 1 °C
Holding time with/without vacuum 00:00 to 99:59 00:01 min:s
Temperature rise/drop 2 2 to 99 or max. 1 °C/min
End/firing/cooling/relaxation temperature 2 100 to 1200 1 °C
Holding time with/without vacuum 2 00:00 to 99:59 00:01 min:s
Temperature rise/drop 3 2 to 99 or max. 1 °C/min
End/firing/cooling/relaxation temperature 3 100 to 1200 1 °C
Holding time with/without vacuum 3 00:00 to 99:59 00:01 min:s
Cooling temperature 100 to 1200 1 °C
Cooling time 00:00 to 99:59 00:01 min:s
Relaxation temperature 100 to 1200 1 °C
Relaxation time 00:00 to 99:59 00:01 min:s

 

Classic Mode Range Interval Item
Temperature in the firing chamber 100 to 1200 1 °C
Lift position 0 to 9 1 open to closed
Vacuum in the firing chamber 0 to 9 1 0 to 100%
Time 1 to 64000 1 s
Pressure 0 to 9 1 10 to 300 N
PTA (Press Time Automatic) 1 to 9 1 10 to 90%
Press with/without vacuum individually settable
Active cooling when the firing chamber is closed 100 to 1200 1 °C
Active cooling when the firing chamber is open 100 to 1200 1 °C
Acoustic signal 1 to 9 1 Number of tones
Temperature change rate 1 to 99 1 °C/min
Time-controlled temperature increase 100 to 1200 1 °C/time interval
Time-controlled lift movement 0 to 9 1 Lift position/time interval
… and much more individually settable

The proven DEKEMA AUTODRY function can be activated in all programming modes. The simulated measurement of the object temperature has been further refined and adapted to the needs of modern ceramics.

The controlled electromechanical feed of the innovative upward pressing system requires no extra connection for compressed air and opens up unique possibilities. For example, different shades (presently up to five) can be pressed simultaneously in a muffle ring in a single step (trixpress muffle system not included in the scope of delivery).

The closed insulating system enabled by the upward pressing movement guarantees outstanding firing results even in the high and low temperature range.

Using the traditional silver wire test yields superb repeatability. The maximum vacuum reliability of the AUSTROMAT 354 press-i-dent is a reflection of standard DEKEMA quality.

Press Mode Range Interval Unit
Start temperature/ preheating temperature 100 to 900 1 °C
Final temperatur/ press temperature 100 to 1200 1 °C
Heat rate 2 to 99 or max. 1 °C/min
PTA (Press Time Automatic) on/off
Press time 00:20 to 99:59 00:01 min:s
Press level 0 to 9 1 10 to 300 N

 

Easy Mode Range Interval Unit
Dry temperature (AUTODRY) 80 to 200 1 °C
Start temperature/ preheating temperature 100 to 700 1 °C
Drying time 00:00 to 99:59 00:01 min:s
Closed time 00:00 to 99:59 00:01 min:s
Preheating time 00:00 to 99:59 00:01 min:s
Vacuum level 0 to 100 10 %
Temperature increase 2 to 99 or max. 1 °C/min
Final temperature/ firing temperature 100 to 1200 1 °C
Holding period with/without vacuum 00:00 to 99:59 00:01 min:s
Cooling temperature 90% of end temperature
Cooling time 00:00 to 99:59 00:01 min:s
Relaxation temperature 65% of end temperature
Relaxation time 00:00 to 99:59 00:01 min:s

Setup: Units, language, date, time, screen settings, network, general code, furnace ID, acoustic signal, drying temperature, heating settings, long-term readiness, lift settings, check program, cleaning firing, temperature calibration, seal tests, printer, quality management, diagnosis data, login data, back/recovery, FTP server login and many other functions.

DEKEMA AUTODRY: Simulates object temperature measurement and automatically regulates the distance between the firing chamber and the firing object with the vibration-free lift for precise drying and cooling phases.

Automatic self-test: Internal test routines seamlessly monitor the temperature while the program is running.

Check program: An automatic diagnostics routine is integrated for all system components to determine the service intervals.

Network: JAVA™ Technology for use via IE6, Firefox, Opera, Safari etc.; supports cable-connected devices with automated IP address (DHCP); FTP client/server; OPC server support (optional)

Connections: 1 USB, 1 Ethernet (RJ 45)

Content: AUSTROMAT 354 press-i-dent ceramic furnace, vacuum pump, operating instructions, tweezers, device cable

Technical data: 220-240 V, 110-120 V or 95-105 V, 50-60 Hz, max. 1450 W (incl. pump), 710 mm x 385 mm x 285 mm (HxWxD), 24.5 kg (without pump).

Kullanma Klavuzu

Austromat 3001 Press-i Dent Firing Programs

© Her Hakkı Saklıdır 2018
Adjans Tanıtım Reklam Elektronik ve İnternet Hiz. San. Tic. Ltd. Şti.